Car Strip Light, Lighting Kits|Under Dash Light|Multicolor LED
Our LED Atmosphere Lights instantly set the mood of your car! Simply plug into your cigarette lighter/12v socket and pick your color! Adjust the lights to the sound of your music, or just use them independently. These lights will make any car the life of the party!
- 4 LED Light Strips
- 9 LEDs in Each Strip
- Adjustable Brightness
Easy To Control Remote
- Car inside atmosphere lamp/foot lamp, create a charming atmosphere for you.
High-quality SMD 5050 LED strip lights, waterproof, anti-collision, anti-corrosion.
- The remote control enables you to switch the led mode and adjust the brightness as you wish, also sound-activated allows you to enjoy the fun with the color changing following your car stereo music rhythm as well as your voice.
- 12V Cigarette Lighter with an on/off button on top to press to turn the light on or off.
HIGH BRIGHTNESS LED CHIP
With the wireless remote to control the power switch, The LED music light strip follows the beat and adjusts flashing to fit the strength of the sound, makes your car more attractive.
Car LED light strip has a working voltage of 12V and powered by car charger is equipped with short circuit protection and memory function.
You don't even need the wiring. First plugged into the car cigarette lighter, then peel the back 3M double-sided tape, paste the light strips on the car floor.
4 Music control mode, 8 signal color control, 2 Preset Jump, and 2 Preset Fading Patterns, ON/OFF. You can control it anywhere in the car and feel free to control the color change and brightness.
Car Cigarette Lighter
Easy installation, you just need to connect the black receiver box with the cigarette lighter, then install this cigarette lighter in your car, you can easily start to use your LED Lights Strip
High Quality LED Chips
Our LED strip light equips with 48 Bright 5050SMD LED, waterproof, anti-collision, anti-corrosion. High brightness LED chip, more uniform lighting. Brilliant color and lighting effect.
Easy to Install:
No need to modify the wiring, simply peel off the double-sided tape behind each strip and apply them under the seats or in the footwell area.
A built-in switch on the cigarette lighter socket, easy to turn it on/off, no need plug and pull frequently.
Affix the strip light
Clean the surface place where you would like to affix, then remove the tape on the back of the lamp strip and stick it where you want to install it.
Install cigarette lighter
Insert the cigarette lighter, and press the button of the Car Cigarette Lighter before using the IR remote, when the button turns red, the light strip is on electricity. You can easily use the remote to control your light strips.
Connect each part
Connect the receiver box with a cigarette lighter, and then you can use the wireless remote after remove the battery cove
1 x Remote Control
1 x Control Box / Sensor
4x 12 LED Strips